
The large knob is delayed: what happened and why
2026年11月12日
Calder
The large knob is delayed to March 2027, in this blog I (Calder) will walk you through everything that happened, and what we’re doing to resolve it.
We will share progress updates every two weeks in the liveblog.
I also made a video explaining what happened, and what happens next:
Where it started
During development, we found an issue with the knob's ball bearing that caused inconsistent rotational feel (torque). It wasn't apparent until we built larger quantities. We traced it to the assembly design of the ball bearing inside the knob. As a result, we had to modify the design and fine-tune the materials inside to compensate. A new trial production gave us consistent rotational torque.
What reliability testing found
Whenever we make changes like this, we run them through reliability testing. These tests expose the product to high humidity, high temperatures, and temperature cycling from low to high (temperature shock).
Although the torque was now consistent, reliability testing exposed two new issues:
30% of the samples no longer passed our accuracy test, and all samples showed a significant change in rotational torque. Accuracy matters because the position on screen needs to match where the knob actually is. A knob that only tracks movement wouldn't have this problem, but reporting its exact position is a core feature of the large knob.
We determined that high temperature has the greatest impact on both accuracy and torque. What we haven't been able to determine yet is which mechanical properties change and cause this.
Why I decided to delay
This put us in a position where we had to choose between product quality and timeline. We could not make the promised date unless we accepted that this unknown issue would remain for the first few production runs, which meant the first customers would risk running into it.
This is a new product category (rotary devices), and our solution was built from scratch. Every part is custom; only the ball bearing and screws are off-the-shelf. I decided it's better not to take any risk, and to call a delay.
Our part in this
I won't claim this is all just chance and that we can't help it. There is something we do at Wooting that has both good and bad sides: we can't help but experiment all the time, even mid-development. To be frank, I'm often the one who brings that "screw it, let's just try/change it" mentality. It also comes with real consequences, like these surprises.
While I was still looking for a middle ground on the timeline, my marketing colleagues advised me to simply call out the worst-case scenario. Better to under-promise and over-deliver.
Why March 2027
We need more time to run tests to narrow down the root cause. Then we need to account for new materials, which means new reliability testing and new lead times, while we're heading into the holidays and Chinese New Year (the factory practically closes for three weeks in January/February, baking in a month's delay if we don't make it in time). Hence, worst case, March 2027.
<3 Calder
Wootingより。
愛を込めて。
製品アップデート、ニュース、最新リリース情報。
キーボード
© 2026 Wooting. 無断転載を禁じます