Wooting 60HE v2 Prebuilt with Aluminium Case
Last updated: 14/05/2026
Introduction
This guide will help you get started with your brand new Wooting 60HE v2. Make sure you read through it without skipping too many steps. You'll be thankful you did so afterwards.
First of all, if you haven't already, join our Discord community! Glory is only as sweet as the people that are there to witness it. Share your experience, enjoyment, and learn from others that also got a Wooting 60HE v2.
You are hereby invited to join the Wooting Discord server!
And if you're digging your set-up, or built a cool custom Wooting, don't be shy and tweet us a sweet picture at @WootingKB.
What's inside the box?
Let's first double-check if you've received a complete Wooting 60HE v2 package.
- 1x Wooting 60HE v2 (ANSI)
- 1x Module puller
- 1x Keycap and Switch puller
- 3x Spare Lekker Tikken Switches
- 1x Wooting strap
- 1x Strap attachment piece (stainless steel)
- 1x Decorative 'no strap' piece
- 1x USB-C to USB-C 2.0 cable (2m / 6.6ft)
- 1x Dongle USB-C (♀︎) to USB-A (♂︎)
- 1x Silicone dampening layer
- 1x EPDM Foam dampening layer
- 3x Spare strap attachment screws (M2 x 3mm)
- 4x Spare PCBA screws (M2 x 4mm)
- 2x Spare silicone plugs
- 1x Postcard
Installing Keycaps
If your Wooting 60HE v2 is an ISO model, it comes without keycaps pre-installed. Don't worry, installing them is simple and a great way to bond with your new keyboard.
Depending on the keycap set you have, installation can be as easy as transferring them straight from the blister tray onto your keyboard. Press each keycap down firmly so it sits snugly on the switch.
Below, you'll find a visual layout of all available ISO keycap languages for reference. Select the language of your keycaps and get started!
Pulling Keycaps
If you've messed up your keycap placement, need to pull out the PCBA, or you want to install a brand new set of keycaps, it's time to master the art of keycap pulling.
Your Wooting 60HE v2 came with a special 'keycap & switch puller', a tool that functions both as a keycap- and switch puller. Make sure to use the right side of the tool (the side that says 'keycap) and follow the instructions below.
01
Position the keycap puller
Align the puller over the keycap and push down. Make sure it *clicks* on both sides.
02
Pull the keycap straight up
Pull with one hand straight up. With your other hand hold down the keyboard.
Pulling Switches
Did you get new switches? Grab the 'keycap & switch puller' that came with your keyboard. Don't be a fool, use the side of the tool that says 'switch'.
01
Grip the switch tabs
Carefully grip the north (top) and south (bottom) sides of the switch.
02
Squeeze and pull the switch
Gently squeeze and wiggle to detach both sides. Then pull to release from socket.
Pulling the PCBA
If you're using the friction fit pad start at step 1. If you've screw-mounted the module in a case, unscrew the screws before taking out the module.
01
Remove the required keycaps
Take off the spacebar and right-alt keycaps (use the right-spacebar if you're on a split layout).
02
Hook the PCBA puller tool
Then take the PCBA puller tool, hook it into the exposed hole.
03
Pull the module out
Gently pull the module out of its case.
Strap/no-strap mounts
Your Wooting 60HE v2 has a ‘strap mount piece’ installed by default, you can however swap out the basic strap mount piece and replace it with the ‘stainless steel’ option, or the no-strap option if you don’t like our beloved strap. Use a PH1 screwdriver to remove the screws from the inside of the case and then take the mount off.
Strap assembly
Let's make your Wooting 60HE v2 stand out. Assemble the Wooting strap onto the clip using the silicone attachment.
- Pull the silicone attachment through the clip hole located on the left top side of your 60HE v2 (by default).
- Fold the Wooting strap in half and align the screw holes. Then align the folded strap with one side of the silicone attachment's screw holes.
- Push the female (binding post) screw through the aligned holes, covering 3/4 layers. Add the last layer to the female screw and squeeze it together as a strap sandwich. Now you can screw and tighten the male screw.
- Repeat step 3 for the second binding post screw.
Bottom case dampening
Your Wooting 60HE v2 Aluminium Case has a silicone dampening layer inside by default, but we also added an EPDM foam layer. You can swap out the silicone for the EPDM foam, or leave the case empty, to change your keyboard's sound profile.
Silicone Block - The clackier and sharper option (pre-installed).
EPDM Foam - The slightly thockier, deeper option.
No case dampening - If you prefer to hear the resonance of your case.
键盘模式与快捷键
没有方向键不是不行，但有的话岂不更好。这就是为什么我们为Wooting 60HE v2加入了方向键和其他实用的快捷键。
开箱即用，您的Wooting 60HE v2默认附带2个额外功能层，可通过Fn1和Fn2键切换使用。
下面是默认映射键位，但您可以在Wootility中自由调整任何功能。由于默认功能均未印在键帽上，因此在自定义时也不会造成混淆。
确保选择与您的键盘对应的配列。
您的Wooting 60HE v2板载预装了两组默认配置，一个打字配置和一个游戏配置具备更快的触发点和Rapid Trigger（RT功能）。
您最多可以在键盘上保存4组配置，并可随时切换使用。
按住 Fn 然后按 Return
按住 Fn 然后按 O、P、[ { 或 } ]
Wootility
Wootility是用于配置您键盘的软件。我们提供两个版本的Wootility，轻量级的网页版和一个可下载的桌面应用程序。无论你选择哪个版本，配置完键盘后都无需运行Wootility。
我们始终在不断优化固件和软件。确保通过更新键盘以体验最新、最完善的功能。
前往https://wootility.io并连接您的键盘。然后：
- 如有可用的固件更新，您将自动收到通知。您也可以前往设置→更新→我的设备，将鼠标悬停在您的设备上并开始更新。
- 更新时出现问题？这篇内容或许能帮到您：更新或恢复期间出错。
- 如需更新软件，请前往设置→更新并点击“检查更新”
来自 Wooting。
用心为您。
最新产品信息、新闻和发布。