80HE Second Batch Update!

‍

The second batch of 80HEs is en-route to our fulfillment centers around the world!

‍

Except the White Zinc keyboards and cases...

‍

Later this week, more information will be shared about the status of these orders. If your order contains a white zinc case and you choose to ship it as-is via the Wooting Hub, it will be ready to ship to you about 2-3 weeks after the dates provided below. Later this week, more details will be shared directly to customers via email as well as publicly.

‍

Once the products arrive at the warehouse:

‍

The bulk pallets will be prepared for individual shipments. We'll notify you when it's time to confirm your shipping address via the Wooting Hub. After that, your order will be queued for fulfillment.

‍

Like the first batch, queued orders will be submitted based on the specific items in the order. We’ll provide fulfillment timeframe expectations and other details once we’re ready to start shipping.

‍

US Fulfillment

These keyboards are on the CMA CGM OHIO container ship, heading to the Port of Los Angeles.

Want to track the ship? Track it here

‍

We prioritized these units at the factory and shipped them before the rest of the batch was even finished.

• ETA at the port: 22nd of October (can change)
• Customs Clearance: This is the big wildcard. Random container checks can take up to a week.
• Transport to Fulfillment Center (Las Vegas): After clearing customs, the shipment is trucked to the warehouse

As we are in peak season, the fulfillment center might take up to 10 business days to make the pallets ready for individual shipments.

• Wooting Hub Estimate: Address confirmations should open on the 11th of November.
• This may start earlier if customs goes smoothly. We’ll update you if there’s a change!

NL Fulfillment

These keyboards will be shipped via air freight. The booking hasn’t been confirmed yet, but it typically takes about 2 weeks from start to finish once booked.

• Wooting Hub Estimate: Address confirmations should open on the 31st of October.
• This estimate assumes slower-than-usual logistics. Once we confirm the freight booking, we'll see if we need that extra time or not. With some luck, shipments might start a few days earlier. Stay tuned for updates!

HK Fulfillment

The Hong Kong shipment will travel by truck, making this the shortest trip of all. However, even a short journey requires the cargo to pass through multiple warehouses.

• Wooting Hub Estimate: Address confirmations should open on 24th of October.

There's some extra buffer time for this shipment, but only a couple of days at most. We’ll keep you posted if things move faster than expected!

‍

80HE update - @NA-Champion Fulfillment

After many months of waiting, and seeing so many people from EU-Kampioen and HK-GuanJun receiving their keyboards, your time has almost come!

NA-Champion has cleared import customs!

The keyboards are now trucking to the fulfillment center. To get to your front door, there are a series of steps to go.

Here's what you can expect!

Step 1: Freight Delivery

Freight arrival at the fulfillment center - delivery is expected tomorrow, Tuesday the 24th of September.

Note: your Wooting Hub will not show the batch as delivered until after step 2.

Step 2: Made Ready for Shipments

The bulk pallets need to be prepared for individual shipments.

We do not know how long this will take.

On the 1st of October, "peak season" officially starts at the fulfillment center. 
During peak season, freight deliveries take much longer to be made ready for individual shipments. 
This year, they told us to expect up to 10 business days.

This freight delivery happens just before the start of peak season. Does this mean it'll take 10 business days to be made ready? 5 days? We don't know.

Step 3: Pick and pack

Currently we expect to start shipping orders on the 1st of October.

This is what your delivery estimate in the Wooting Hub assumes as well.

Address confirmations will start on Monday the 30th of September.

You'll be able to confirm your shipping address is still accurate via the Wooting Hub.

We will be submitting orders in groups to help the fulfillment center get as many orders out the door as quickly as possible.

Expect that it will take a full week to get through all the orders, once shipments start.

• Group 1: Prebuilt plastic
• Group 2: Prebuilt zinc
• Group 3: Modules

Step 4: Shipped to you

Getting so very close now! Once your order is packed, a shipping label will be printed and you will receive a tracking link.

With so many shipments going out at once, parcel carriers will not scan them at pickup. Between the time a shipping label being created and the parcel is scanned at the first sorting center, there will be no updates to the tracking. This blind spot can be frustrating, but is perfectly normal.

NA-Champion orders could pick between two shipping methods. You can check which you have on the original order confirmation email.

Expedited shipping:

• Should deliver within 7 days of the label being created.
• If it takes longer, but is still on the way, we will refund the $7.99 you paid for shipping.
• If the tracking does not update for more than 7 days, it can be considered lost.

Economy shipping:

• Should deliver within 14 days of the label being created.
• If it takes longer but is still on the way, then we kindly ask your patience with "free shipping."
• If the tracking does not update for more than 14 days, it can be considered lost.

Step 5: Delivered

Coming soon to a battlestation near you!

If you need any assistance with your shipment, or after delivery, please contact us via the Support Wizard.

‍

United States Fulfillment for @NA-Champion

The orders shipping via HK and NL get to be shipped a little earlier, but we've got some good news for our US friends as well!

We're a bit ahead of schedule and with some luck can start fulfilling orders before the end of September!

These keyboards are traveling via sea freight from China to Los Angeles. You can follow the shipment live! They're on this boat, currently sailing across the Pacific Ocean!

https://www.vesselfinder.com/?imo=9448798

On the vessel tracker, you can see that the boat is expected in the Port of Los Angeles on the 16th of September. However, please take this date with a grain of salt... Sea freight shipments often take up to a week longer to arrive at port than the tracker estimates.

Once the keyboards arrive in LA, they will need to clear customs. Typically this takes a day or two, but there is a chance that our container gets randomly selected for additional checks. This is perfectly normal, but if it happens can take a week to complete.

After the keyboards clear customs, they will get trucked to our fulfillment center in Las Vegas, who are ready and waiting to pack thousands of orders per day.

Stay tuned for the exact date when we'll start the address confirmations and start submitting orders to get fulfilled!

Netherlands Fulfillment for @EU-Kampioen

The Dutch fulfillment center will be packing the most orders, with the most SKU combinations, and delivering to the most countries. We've been working closely with them to ensure this goes smoothly, and can't wait to knock it out of the park!

To help prepare, we've been meticulously reviewing the shipping addresses for all of these orders over the last few weeks,  with the goal of spotting any problems (and getting them fixed) before we're ready to submit the orders.

Even still, we will use the address confirmation system via the Wooting Hub to force everyone to double check that everything is in order before we yeet the parcels all over the world.

Starting at the end of this week...

Friday the 13th of September:

You will be able to confirm your shipping address is (still) correct via the Wooting Hub. Once you confirm your address, your order will be queued for fulfillment.

Monday the 16th of September:

Orders will start getting submitted for fulfillment. They will get submitted based on primarily the items in the order and secondarily the destination country.

• Orders with fewer items will get submitted first (I know... they spent less and get to go first? Not cool... But efficient! We need this efficiency, and it's only a couple day's difference, I promise!)
• Orders shipping to countries closer to the Netherlands will get packed first, then EU orders, then high volume destinations like the UK, Canada, and Australia, then the rest of the world.

Tuesday the 17th of September:

Wooting Team will be at the fulfillment center to document the process for a fulfillment vlog similar to the factory tour!

Hong Kong Fulfillment for @HK-GuanJun

The freight shipments have been booked and pallets upon pallets of 80HE's are on their way to our fulfillment centers around the world!

The first fulfillment center to receive the keyboards is the one in Hong Kong.

All of the orders that will get fulfilled via HK have been reallocated to the HK-GuanJun batch. Make sure you "refresh roles" on the Wooting Hub so that you can get notified via Discord once they're ready to go!

This is the first time that we're going to be shipping this many orders with this many SKUs via our Hong Kong fulfillment center. To make sure it goes smoothly, we're taking it a bit slow. The keyboards will be ready next week, but we're going to take a little bit of extra time to coordinate with the fulfillment center so that there's no surprises.

Starting today....

Wednesday the 11th of September:

You will be able to confirm your shipping address is (still) correct via the Wooting Hub. Once you confirm your address, your order will be queued for fulfillment.

Friday the 13th of September:

All of the queued orders will get submitted for fulfillment at the end of the day. This will allow us to review the submitted orders over the weekend and make sure there are no glitches.

Monday the 16th of September:

The fulfillment center will start packing orders and preparing them for shipment!

• Orders shipping to China will get packed first, and then imported in bulk back to China where they will get shipped domestically to customers.
• Orders shipping to Hong Kong will get shipped domestically.
• Then orders shipping to Japan and Taiwan will get packed and shipped via express courier.

‍

Lekker v2 switch packs available now!

(soon for USA)

‍

The best switch Wooting has ever made is now available for purchase on our storefront! These switches have improved housing tolerances for less key wobble AND improved magnet tolerances for more accurate and precise measurement of switch position. Feast your ears on a lovely sound test.

You can now order L60 switch packs or L45 switch packs, in packs of 20, 70, or 90.

Shipping times:

• In stock in the Netherlands, ready to ship!
• Arriving soon in the United States, shipments start on the 10th of September

Already have a Wooting keyboard? (any keyboard other than the 80HE)

Enjoy a limited time discount to upgrade to the new Lekker v2 switches!

You'll find a discount code in the Rewards section of your Wooting Hub to get 20% off either a 70 pack or 90 pack of v2 switches.

This discount will be valid until all of the Lekker v1 switch packs are gone.

Speaking of v1 switch packs... We've still got quite a few of them at our fulfillment centers! While supplies last, all of these switch packs are now 50% off by default! This means that a new 70 pack of v1 switches are just $19.99/€19.99(incl. VAT) when purchased by themselves, or just $9.99/€9.99(incl. VAT) when purchased with a module! A 12 pack of Lekker v1's are just $4.49/€4.49(incl. VAT)!

‍

‍

80HE update - QC Passed!

Great news! The first batch of 80HE's have passed all of the quality control checks with flying colors!

This means that there's only three steps remaining between now and you having your new keyboard on your desk, ready to game.

• Freight Shipment: Getting the keyboards to our fulfillment centers in Hong Kong, the Netherlands, and the US.
• Pick & Pack: The fulfillment center picking all the items in your order and packing your shipment.
• Last Mile Shipment: The parcel carrier delivering the parcel to your front door!

It's getting close now... Are you excited yet? We sure are!

Now that fulfillment is right around the corner, we're locking down order edits for the first batch.

Starting the 1st of September, customers in the 1st batch will no longer be able to add items to their 80HE order.

• Requests to add items made prior to the 1st of September will still be honoured, while supplies last.
• This includes swapping items, as that requires "adding" the new item.
• It will be possible to remove items after the 1st of September.
• If you absolutely must add that additional item after the 1st, expect that it will probably push your order to the 2nd batch.

Please note, if you request an order edit prior to the 1st of September, it will take up to a week to process it. We've got quite a few support requests outstanding, and are primarily focused on the most time critical requests: Cancellations, Shipment Support, and Returns.

Locking down order edits for the first batch well ahead of fulfillment helps us ensure we can process all of them by the time the orders are ready to ship. Thank you for your understanding and patience!

‍

80HE update! Nearing Completion...

Too long, didn't read...

• The first batch is almost done!
• Manufacturing completes Monday the 26th of August.
• Next are quality control checks - this takes a few days.
• Then freight shipments to our fulfillment centers in HK, NL, and US!
• New batch name for orders shipping via HK - refresh roles on the Hub!

Hungry for details? Why of course!

For manufacturing updates, best to check out our latest Youtube videos including the production updates and the factory tour vlogs!

Factory Vlogs

High Quality Products

How do we ensure that your keyboard is going to be high quality?

In manufacturing, the definition of quality is the adherence to the specification.

The specification, or the spec, is the standards and expectations that Wooting has for all our products. The spec defines what we consider are "defects" and also categorizes them as minor, major, and critical defects. We consider things like:

• Do all of the components work as expected? LEDs, sensors, switches, stabilizers, etc.
• Is the product assembled correctly and perfectly? No gaps, loose screws, or cables not fully plugged in.
• Are there any cosmetic issues? No blemishes, stains, or scratches.
• Is everything packaged neatly into its product box? Are the product boxes neatly combined into master cartons? Does it have all the right stickers for the barcodes and certifications?

We measure this by doing Quality Assurance (QA) testing and Quality Control (QC) testing! These are technically two different things, but work together to ensure that the product that ends up on your desk is the best it can be. Quality Assurance is about the process, Quality Control is about the product.

The factory is responsible for quality assurance, where they keep a close eye on the production process to ensure that everything they make meets our expectations.

Quality control is checked by a third party service to ensure nothing gets missed. The randomly pick master cartons of finished products to investigate what's really in the box. They sample enough products to be sure that their experience opening many boxes is a good representation of what all customers might experience opening their box.

There's a whole science to it! Thankfully, we don't need to reinvent the wheel. The US Department of Defense set the standard for sampling, called the MIL-STD-105E, back in 1989.

MIL-STD-105E

What's critical to understand is that we decide what kinds of defects are considered minor, major, and critical. We also decide how many of each kind of defect are acceptable in a batch of products. The exact numbers are confidential, but our commitment to quality demands that they are very small.

Freight shipments

Once the keyboards pass quality control testing, we will ship them to our three fulfillment centers around the world!

All of the orders for the first batch are split into three batch names, depending on the fulfillment center that will ship the order. Just this week, we updated the orders that will get shipped via the Hong Kong fulfillment center to show the HK- batch name.

Make sure to check your Wooting Hub to see if your order got swapped to that batch! If it did, make sure to refresh your roles on the Hub, so that you can get the lastest notifications for your batch.

All three fulfillment centers will receive the 80HEs on different days. HK will receive it first, because they're the closest to the manufacturer. Then the NL fulfillment center will get their 80HEs, followed by the US fulfillment center.

Once the freight shipments start, we'll know with pretty good accuracy when exactly the fulfillment centers will be ready to start packing and shipping orders.

We'll be sure to post an update here once we have the exact dates. In that update, we'll share more about the fulfillment process including how exactly the fulfillment centers will manage to pack and ship thousands of parcels in just a few days!

80HE Update: Mass Production Continues!

Good news! We found the problem with the IC part "U9," and fixed it.

Calder goes into depth about the IC part problem, what caused the short circuits, and how we addressed the issue. I'll leave Calder to discuss the technical details in the Youtube video, but the super short version is: the way the keyboards were getting tested to ensure they worked correctly was ironically breaking them.

Here are the details:

Wooting 80HE - We Found and Fixed the Problem

What does this mean for the delivery timeframe?

Unfortunately, this does not mean that we'll be able to deliver your keyboard to you earlier than the estimates we communicated a couple weeks ago.

By stopping production until the problem was fully understood and fixed, that means the six week delay communicated previously is now set in stone.

Thankfully, the keyboards that we've already made do not need to be reworked! That said, we do still want to check each and every one of the keyboards that were manufactured to make sure no problems slipped through. This rechecking will take a couple of weeks to be fully completed. At the same time, the remaining keyboards from the batch are being manufactured. It's worth noting as well that the factory making 80HE's also needs to keep up with the demand for 60HEs, W2HEs, as well as creating products for other companies.

With all of these considerations in mind, the updated estimated ready date for the full batch of keyboards at the factory is the 26th of August. I want to take a moment here to express gratitude to our manufacturing partner for their flexibility, openness, and agility in adapting to the changing circumstances. It's no small feat to dramatically reconfigure mass production planning and scheduling, especially when throughout this process there were a great many unknowns and questions.

After production, what's next?

Once the batch finishes production on the 26th of August, a third party quality assurance company will inspect the keyboards to ensure that they all match our specifications. We've been using this third party service for years now, so they are very experienced in understanding our products and expectations. We expect this to take a few days.

After we get the green light from quality assurance, the keyboards will make their way to our three fulfillment centers in Hong Kong, the Netherlands, and the United States.

Transit methods and times are different for each fulfillment center. Even after we book the individual freight shipments, the actual delivery to our fulfillment centers may still change. The dates provided below are a realistic expectation for when we believe we can start fulfilling orders, but they are still estimates and are subject to change.

HK fulfillment starts: 17th of September

NL fulfillment starts: 26th of September

US fulfillment starts: 8th of October

Remember, these dates can still change. We'll be sure to update everyone if they do!

How long will fulfillment take?

To fulfill all of the orders in this first batch, even split across three fulfillment centers around the world, it will take up to a week for all of the orders to get fulfilled.

Each fulfillment center has a slightly different strategy for how they want to execute on getting the entire batch completed as efficiently as possible.

Remember to check the Wooting Hub for the most up to date delivery estimate for your specific order. This estimate is tailored for your batch, your shipping method, and the country your order is delivering to.

Wooting Hub

‍

80HE Update - Major Manufacturing Delay

The estimated delivery date of the 80HE has been pushed back 6 weeks for all regions and all batches due to a problem discovered during the manufacturing process.

Your Wooting Hub has been updated with the new date that your order is expected to deliver to your front door, based on your specific fulfillment region and shipping method.

‍https://hub.wooting.io

What happened?

We've posted a video update sharing more information about the problem we discovered, and how we are resolving it.

https://www.youtube.com/watch?v=Uf6QannIR5s

In short, a critical IC part has a high level of defects. This in and of itself isn't a huge problem, as each keyboard gets tested multiple times during the manufacturing process. However, while investigating this problem we discovered that keyboards could pass all of the checks during manufacturing and then still fail after it has been packaged and prepared for shipment.

This means that some of the keyboards could be packed up at the factory in a working condition, but by the time it delivers to you, it's dead on arrival. This is absolutely unacceptable, and therefore production was completely halted until we can get this figured out.

How will we fix it?

Replacement IC parts are en route to the factory, and manufacturing will start back up as early as next week. Due to the nature of the PCBA production process, especially the water resistant coating process, as well as the sheer volume of keyboards getting produced, it will take up to 6 weeks for all of the keyboards to get produced.

There is a chance that the keyboards we've already manufactured can get reworked to replace the current IC part with a new one. If so, this would speed up the timeframe. However, this needs to get validated before we can confidently consider that as part of the delivery estimate.

Our commitments to you

Wooting is committed to producing the highest quality products we can. While this delay is both significant and frustrating, we believe that getting it right the first time is more important that getting it done quickly.

If you disagree with our decision, or your patience has run out, we understand. If you wish to cancel your preorder, you can do so for a full refund any time prior to the order getting submitted for fulfillment. To do so, reach out via the Wooting Hub's contact us page or email social@wooting.io

Our current focus is to ensure that the production can continue as soon as possible. You can be sure that we will be checking, double checking, and triple checking the replacement IC parts to ensure that they will function as expected for years and years to come.

At the same time, we are conducting a thorough root cause analysis and will share the results of our investigations in a deep-dive blog post at a later date.

Thank you for your patience and understanding! 

<3 Wooting

Batch update for 80HE - Logistics

This is the first batch update for our newest keyboard, the Wooting 80HE. The focus of this update is on the logistics of getting your new keyboard into your hands. If you want to learn more about the development and manufacturing of the 80HE, checkout our Youtube videos documenting the process!

https://www.youtube.com/watch?v=HAYcQ-z9FTY&list=PLUwyc5IrGTnzKU3h_zhLDXA4OUi0Mszwl

‍

TL:DR

The date mass production finishes is (finally) locked in! The first batch will be complete by the 26th of July, about 4 weeks behind schedule.

After production, the keyboards will travel via land, air, and sea, to our fulfillment centers in Hong Kong, the Netherlands, and America.

The freight shipments each have a different estimated ready date to start fulfilling orders:

• HK fulfillment center: 6th of August
• NL fulfillment center: 15th of August
• US fulfillment center: 27th of August

Each fulfillment center will process the large volume of shipments a little bit differently, but all three will take up to a week to fulfill all the orders.

The above applies to NA-Champion and EU-Kampioen

For NA-Bridge and EU-Brug orders, this pushes the production planning for your batch back about 4 weeks as well.

‍

The long version

The marketing team got to play around during the campaign, the industrial designers made sure we're getting the best possible products, the devs are working on polishing the firmware and the software, but now's when the real fun begins. You want your new keyboard in your hands. What's it gunna take?

Welcome to the world of logistics.

We need to get the keyboards and accessories from the manufactures to our fulfillment centers, and from the fulfillment centers to all you across the globe. And we've got to do it as quickly and efficiently as possible, with the fewest number of errors.

We have three fulfillment partners around the world, and each one will receive the products at a different time. NA-Champion will get fulfilled via the US fulfillment center. EU-Kampioen will get split between NL and HK fulfillment.

Hong Kong fulfillment

Orders getting fulfilled via HK will get assigned a new batch name, HK-Kampioen. Or should we call it HK-GuànJūn? If your order is going to get shipped via HK, in the next few weeks you'll this update in the Wooting Hub. You do not have to take any action.

Orders will be assigned to HK fulfillment based on the destination country and the items in the order. Soon, new orders will be able to pick their preferred fulfillment center during checkout. However, for this batch and for any orders placed before that system goes live, that has already been decided and unfortunately cannot be overridden based on personal preference.

Orders shipping via HK will get fulfilled based on destination country: first China, then Hong Kong, Taiwan, and Japan. We expect this fulfillment process to take about 1 full week.

Netherlands fulfillment

Our Dutch fulfillment partner will fulfill the most orders, with the most SKUs, shipping to the most countries, via the most parcel carriers. This is operationally very complex, but we made a solid plan with the fulfillment center and are ready to knock it out of the park.

Orders will get fulfilled based on product combinations and then destination country. Orders with fewer products will get fulfilled first, followed by orders with more accessories. That means people who bought more accessories will get fulfilled a later than those who didn't, which feels a bit backwards but is operationally much more efficient. Within cohorts of orders with similar items, shipments will be packed based on destination country, starting close to the Netherlands then radiating outward.

Roughly 80% of orders will get fulfilled within 5 days. However, due to the immense complexity of the operation, the remaining 20% of orders could take up to two full weeks to get completely processed.

USA fulfillment

I'm sure you noticed that US orders will start getting fulfilled last. This is because we must use sea freight to bring the keyboards from China to America. Our hope is to get these keyboards made first and start the freight shipment early. We have yet to get confirmation that this is possible, or how much sooner they can be ready, but we'll update you once we get that information.

We expect the fulfillment itself to go smoothly, once the products arrive. Unlike our Dutch fulfillment partner, US orders are all going to US addresses and there are fewer SKUs to deal with. They have been made aware of the larger-than-normal volume heading their way, and they're ready for it. Even still, expect it to take about 5 days for all the orders to get processed.

All fulfillment centers

Many thousands of orders, 100+ product combinations, shipping to 80+ countries around the world...  Fulfillment at scale takes time, and both humans as well as machines make mistakes. Rest assured, Wooting has seen every kind of shipping case imaginable - we've got your back! We've got keyboards reserved to deal with lost, damaged, or defective shipments.

‍

The 60HE has become the 60HE+!

Starting with NA-Sea and EU-Zee, the prebuilt 60HE has become a prebuilt 60HE+.

This also applies to all future batches, including the upcoming NA-Apple, EU-Steeltje, and EU-Vochtig.

What is the difference between the 60HE and the 60HE+?

There is a physical change to the PCBA design so that it is compatible with screw-in stabilizers.

What hasn't changed between the 60HE and 60HE+?

The prebuilt 60HE+ still comes with plate-mounted stabilizers. (It is compatible with screw-in stabs, they are not included.)

The prebuilt 60HE+ still comes with a steel switch plate.

All prebuilt 60HEs and 60HE+s come with preinstalled L60 switches.

For ANSI 60HEs and 60HE+s, it comes with black Wooting PBT keycaps preinstalled.

For ISO 60HEs and 60HE+s, it does not come with keycaps so you can pick your preferred ISO keycap language.

How is the prebuilt 60HE+ different from the 60HE+ module?

The 60HE+ module is a premium version of the 60HE+, aimed at custom keyboard hobbyists.

The module comes with...

• screw-in stabilizers preinstalled
• polycarbonate switch plate preinstalled

The module does not come with...

• switches: you can pick between L45 and L60 switches at purchase or use a third-party switch.
• keycaps: you can pick from the keycaps available on our storefront or use third-party keycaps.
• case: you can pick from the available Alumaze60 options or use a third-party case.

Why did Wooting make this change? Why even call it a 60HE+?

While developing the 60HE+ module, we needed to make a physical change to the PCBA to support screw-in stabilizers. This was a very important feature for many people in the hobbyist community!

Operationally, it doesn't make sense to have two different PCBA versions, so we brought the changes to the prebuilt version as well.

This compatibility update doesn't matter to most people, except for one specific scenario: secondhand sales.

If someone buys the keyboard from ebay or Marktplaats, it would be extremely difficult for the buyer to know whether or not their keyboard is compatible with screw-in stabs unless we updated the product name.

We still have a bunch of original prebuilt 60HEs in the warehouse!

If compatibility update isn't important to you, then you probably just want your new keyboard ASAP!

Good news: we've got the buffer stock on hand to ship lots of orders!

So that we don't overload our customer service team, this will all be automated.

Starting mid-next week, while supplies last:

Current preorders for NA-Sea and EU-Zee will be able to swap their prebuilt 60HE+ for an original prebuilt 60HE via the Wooting Hub and get their order shipped immediately*.

note: immediately doesn't mean teleportation: still need to go through the fulfillment process.

When this becomes possible via the Wooting Hub, you'll get an email notification.

New orders of can choose between the prebuilt original 60HE and the prebuilt 60HE+ in the storefront configurator.

For ISO layout 60HEs, we have a very small buffer. If you want your order shipped early instead of waiting for the 60HE+, you'll need to be quick!

For ANSI layout 60HEs, we have quite a substantial buffer. We expect to be selling the original prebuilt 60HE alongside preorders for the prebuilt 60HE+ for at least a few weeks.

Timing for upcoming 60HE+ batches:

The dates below are when we expect each batch will be ready at the warehouse for individual shipments.

These dates can still change, but are a pretty good reference point. Once all of your items are at the warehouse and ready to go, you'll get an automated email heads up.

• NA-Sea: shipments start the 18th of March
• ‍Na-Apple: shipments start the 28th of March
• ‍EU-Zee: shipments start the 17th of February
• ‍EU-Steeltje: shipments start the 28th of February
• ‍EU-Vochtig: shipments start the 4th of April

Extra, extra, hot off the press!

‍

Quality control checks passed majestically, and the keyboards are roaring to start the freight shipments from the manufacturing den on towards our fulfillment centers!

‍

The lion's share of the batch will head to the Dutch fulfillment center, with a portion heading to the US and a portion heading to Hong Kong as well.

‍

Netherlands fulfillment

‍

It's business as usual: the freight shipment via air will take 2-3 weeks in total, and shipments can start the first week of January.

‍

US fulfillment

‍

It looks like we're going to catch an earlier boat than originally forecasted! That would mean we could start last-mile shipments 1 to 2 weeks ahead of schedule.

‍

This will not be reflected in your estimated delivery date until we get confirmation that we caught the earlier boat.

‍

Hong Kong fulfillment

‍

The first shipments (from the last batch) took longer to get going than we had hoped, but are now in progress! As part of the trail, we sent test shipments to each of the destination countries, and they went without a hitch.

‍

Therefore, the remainder of the orders will get packed and shipped out this week, delivering to your front door next week.

‍

With the initial setup complete, we'll be fulfilling additional orders from EU-Leeuwin out of Hong Kong as well. It possible that these can get shipped the week of the 18th of December, and deliver before the end of the year.

‍

If your shipment is eligible to get pulled forward, we will inform you via email directly.

‍

The King of the (keyboard) Jungle

‍

NA-Lion and EU-Leeuwin both still have keyboards available for purrchase, in ANSI and ISO. These beasts are the pride of Wooting, now's your chance to pounce! 🦁

December is already upon us, with just one more major keyboard batch arriving to our fulfillment center this year. Here's what you can expect to wrap up 2023, and a first look into the start of 2024!

‍

NA-Syrup

The last major batch shipment of 2023 is NA-Syrup, and it's coming in hot! The freight shipment has made its way to America, has cleared local customs, and is expected to arrive at the fulfillment center today.

Once it arrives, the bulk shipment needs to be received and prepared for individual shipments. This process typically takes a couple business days.

The freight shipment is a full week ahead of schedule, and with a little bit of luck, the keyboards might even deliver to customers before Christmas! (This is not a guarantee... Holiday season in the US gets crazy for parcels!)

Shipments start: the 11th of December

‍

NA-Lion

The next batch of 60HEs heading to the US is NA-Lion, which has just finished getting manufactured and is currently getting checked by quality control. As soon as it passes, the freight shipment can start. Since the freight shipment is traveling during the height of the holiday season, we've added some extra buffer to ensure that we achieve the estimated delivery dates listed on the Wooting Hub.

Our expectation is that by the time NA-Lion is ready for shipments, the batch will be just about sold out. As always, orders get allocated a keyboard from the earliest available batch at the time of purchase. Therefore, the sooner your order, the sooner it delivers! 

Shipments start: the 27th of January

‍

EU-Leeuwin

This batch will be the very first to arrive to our EU fulfillment center in 2024, and it's a big one. Really big. So large in fact, that the manufacturer has provided two different ready dates for the ISO and ANSI layout keyboards. The ISO keyboards have already finished getting made, and passed the quality control checks. The ANSI layout keyboards are expected to finish getting manufactured by the 11th of December, and will then get its quality control checks completed.

Once quality control is passed, we'll be shipping these keyboards to our EU fulfillment center. In the EU, the holiday season is not quite as disruptive to freight shipments, and therefore we expect it to arrive in time to start shipping to customers the first week of January. However, due to the enormous size of the batch, we expect it to take a full week to get all of the shipments packed and out the door.

There is a very good chance that by the time these keyboards deliver to our EU fulfillment center, we will have enough 60HEs to be in stock for both ANSIs and ISOs! This would be the first time that ANSI 60HEs are in stock for orders shipping from the EU, with ISO 60HEs having been in stock for a couple of weeks at the start of November.

Shipments start: the 5th of January

The full sized Wooting Two HEs were in stock for about a month, but the sales rate increased faster than our production schedule planned for... Thankfully, our batch allocation system seamlessly transitioned into a backorder queue as designed.

Broadly speaking, we'll be getting the W2HE back in stock once the next freight shipment arrives at the end of January. Wanna know the details? Keep reading below! 

‍

US orders (USxxxxxA)

NA-House

Fully received and shipped out to customers. Enjoy! <3

NA-Tiger

This batch is currently being manufactured, and is expected to finish during the week of the 11th of December. The freight shipment will be bundled with NA-Thunder, and will travel to our fulfillment center shortly thereafter.

Due to the holiday season, we've added in some extra time in case the freight shipment takes longer than usual. If the batch ends up delivering early, we'll make sure to @mention people on Discord, and send out emails to all the customers in the batch.

Shipments start: the 5th of February

NA-Thunder

This batch is also getting manufactured, with final assembly to be completed just after NA-Tiger finishes. This will be ready at the manufacturer by the 15th of December. Once completed, quality control checks will be done and the batch will make its way to our US fulfillment center along with NA-Tiger.

We'll let NA-Tiger have a 3-day head start on confirming their shipping address and starting the fulfillment process, then we'll start getting these orders shipped out!

Shipments start: the 8th of February

NA-Storm

By the time NA-Thunder arrives to the warehouse, we expect to be back in stock with a limited number of keyboards available for immediate purchase. When NA-Storm delivers a couple weeks later, that will bolster the available stock to a healthy level.

NA-Accident, NA-Jump

By the time these batches are delivering to our fulfillment center, we'll have plenty of stock of W2HEs on hand. These two batches will make sure that we're in great shape to keep the W2HE in stock for the foreseeable future!

‍

International orders (EUxxxxxH)

EU-Huis

Fully received and shipped out to customers. Enjoy! <3

EU-Tijger

The sister batch to NA-Tiger, the production is expected to finish the week of the 11th of December. This batch will be shipped to our EU fulfillment center, which tends to be a little quicker freight shipment than the one heading to the US. Historically, the holiday season has had less of an impact on freight logistics in the EU than in the US. We will probably be able to start shipping these orders sooner than the date listed below, but how much sooner is unknown. To get notified the moment that orders are ready to get fulfilled, sign up for batch notifications via Discord on the Wooting Hub! 

Shipments start: the 30th of January.

EU-Donder

Just like with NA-Thunder, this batch will be completed immediately after EU-Tijger and will travel to our fulfillment center in the same freight shipment. The EU fulfillment center typically takes a little bit longer to get a full batch shipped out. Should the freight shipment deliver to the warehouse early, we will first let all of EU-Tijger get fulfilled before starting shipments of EU-Donder.

Shipments start: the 1st of February

EU-Onweer

Coming right on the heels of EU-Donder, EU-Onweer will get manufactured and shipped to our EU fulfillment center in time to get us fully caught up on preorders. Once this batch delivers, we expect to be in stock for both ANSI and ISO layout keyboards.

Shipments start: the 6th of February

EU-Ongeval, EU-Spring

These batches will arrive just a week or two after EU-Onweer, and will serve to bolster the number of keyboards in stock to ensure that the W2HE is ready for immediate fulfillment all over the world.

‍

60HE+ Module is finally available! 

This introductory batch update will list out the first five batches of 60HE+ Modules. Want to know what the Module is? Check out the product page! 

https://wooting.io/wooting-60he-module

‍

NA-Clouds

The first batch, NA-Clouds, will finish manufacturing on the 4th of December.

From there, quality control will check them and the freight shipment to our US fulfillment center will start! 

Given the Christmas holiday, we've planned for the freight shipment to take 6 weeks instead of the usual 3-4 weeks.

Last-mile shipments starting: 16th of January, 2024

‍

Second through fifth batches

After the first batch gets manufactured, the later batches will be completed in quick succession.

The planned manufacturing ready date for each of these is listed below. These dates are not yet set in stone, but are a good indication.

NA-Sky: finishes production the 11th of January, ships to customers starting the 15th of February.

NA-Airplane: finishes production the 16th of January, ships to customers starting the 20th of February.

NA-Moisture: finishes production the 25th of January, ships to customers starting the 7th of March.

NA-Bluetail: finishes production the 31st of January, ships to customers starting the 14th of March.

‍

60HE+ Module is finally available! 

This introductory batch update will list out the first five batches of 60HE+ Modules. Want to know what the Module is? Check out the product page! 

https://wooting.io/wooting-60he-module

EU-Wolken

The first batch, EU-Wolken, will finish manufacturing on the 4th of December.

From there, quality control will check them and the freight shipment to our NL fulfillment center will start! 

Given the Christmas holiday, we've planned for the freight shipment to take 4 weeks instead of the usual 2-3 weeks.

Last-mile shipments starting: 4th of January, 2024

‍

Second through fifth batches

After the first batch gets manufactured, the later batches will be completed in quick succession.

The planned manufacturing ready date for each of these is listed below. These dates are not yet set in stone, but are a good indication.

EU-Lucht: finishes production the 11th of January, ships to customers starting the 1st of February.

EU-Vliegtuig: finishes production the 16th of January, ships to customers starting the 6th of February.

EU-Vocht: finishes production the 25th of January, ships to customers starting the 22nd of February.

EU-Blauwstaart: finishes production the 31st of January, ships to customers starting the 29th of February.

‍

It's been a few weeks since the last major batch update, and there is lots to share. We've got a three big batches on the horizon; EU-Pannenkoek/NA-Pancake, EU-Poedersuiker, and EU-Siroop/NA-Syrup.

EU-Pannenkoek and NA-Pancake

EU-Pannenkoek has already delivered and orders have shipped out. With it, the ISO layout of the 60HE is in stock!

NA-Pancake, its sister batch, has arrived at the Port of Los Angeles. Next step is to clear customs, followed by a quick trip via truck to the fulfillment center. The freight is expected to deliver to the fulfillment center by the 21st of November.

With Thanksgiving around the corner, followed by the two largest ecommerce days of the year, (Black Friday and Cyber Monday) it is unlikely for the keyboards to be made ready for individual shipments until the end of November - maybe later. We'll tag on Discord and send an email as soon as your order is ready to get fulfilled. Make sure to sign up for batch role on Discord via the Wooting Hub!

EU-Poedersuiker, EU-Siroop, EU-Siroop-2, EU-Siroop-3, and NA-Syrup

Wooting is continuing to scale production in a big way, which has led to challenges in some areas and opportunities in others. One of the challenges is in the rapid fulfillment of the ever increasing batch sizes, but I'll get back to that.

First, I want to tell you about a problem we were able to solve without impacting any individual's delivery estimate. This was only possible due to how close we are to being caught up on preorder demand.

Namely, our quality control checks flagged a problem with one of the parts used in the assembly of the 60HE. This batch of EPDM foam was more hard than previous ones, that when assembled in a new 60HE caused the PCBA to sit unevenly in the case. Every single keyboard in the batch was inspected, and 70% of them experienced this problem to some degree. Thankfully, the problem is an easy fix: all it costs is time to source a fresh batch of foam, and time to rework (reassemble) those keyboards.

Thankfully, we had the time. Since we are currently have ISO 60HEs in stock, we could easily reconfigure manufacturing priorities to focus on ANSIs. Additionally, in the US we had ANSIs in stock for as long as ten days last month! With NA-Pancake already en route, we will be in stock again in the US for at least a few days. Therefore, all of the keyboards that passed the 100% inspection plus a chunk of the next batch will get used to fulfill the oldest outstanding preorders.

That would be EU-Poedersuiker orders, whose shipments will deliver to them on time and without delay. Shipments for these orders are expected to start on the 21st of November.

The keyboards that needed to be reassembled, plus the last chunk of that next batch, have been assigned to the orders in EU-Siroop, EU-Siroop-2, and EU-Siroop-3. We broke this batch apart into three parts while we were unsure on the timing for getting the foam issue fixed.

The first part, EU-Siroop, is expected to start shipments on the 23rd of November.

The second part, EU-Siroop-2, has been pulled forward several days with shipments expected to start on the 28th of November.

The third part, EU-Siroop-3, has been pulled forward several weeks with shipments expected to start on the 5th of December.

NA-Syrup gets the short end of the stick, now a much smaller batch and delivering later than originally expected. However, nobody's order has been allocated to this batch yet, and won't for a few weeks yet. After NA-Syrup we've got NA-Lion and EU-Leeuwin, which won't arrive to our fulfillment centers until the start of 2024.

Hong Kong Fulfillment

Finally, there is more good news for EUxxxxxH orders! A fair chunk of keyboards out of EU-Poedersuiker and EU-Siroop have been diverted to a new fulfillment center based in Hong Kong. We will be doing a trial run for selected orders that are destined for customers in China, Hong Kong, Japan, Korea, Singapore, and Taiwan and only contain ANSI-US 60HEs. If your order is selected for this trial, we will notify you via email directly. Assuming the trial goes well, we'll get our accessories stocked there too.

By adding a fulfillment center in Hong Kong, we can dramatically reduce the pressure on our EU fulfillment center which will result in a smoother shipping experience for those customers. Additionally, freight shipments to Hong Kong from our various suppliers in China is much faster, cheaper, and environmentally friendly for orders destined to customers in that region.

In the US, NA-Maze orders have shipped out to customers and the Alumaze60 is currently in stock!

There aren't many left from this first batch though, by the time we launch the 60HE Module, we expect all colors to have sold out. Next batch won't be at our fulfillment center for several weeks, at which point we'll be right in the middle of holiday-season shipping craziness. Expect that the second batch of Alumaze won't start shipping until after Christmas.

In the EU, EU-Doolhof orders can now queue for fulfillment!

We want to make sure to first ship out the current preorders before listing the Alumaze as in stock. Just like in the US, this first batch is almost sold out, with orders for the Concrete Gray already getting allocated to the next batch, EU-Geluk. It is unlikely for those to be ready to ship until after Christmas.

‍

A note on EU order fulfillment times:

The past few weeks have seen more orders packed and shipped by our EU fulfillment center than ever before. Something about catching up on 60HE preorders, new product launches, W2HEs and UwUs in stock, etc... The pace at which order volumes increased took our fulfillment center by surprise, despite our best efforts to warn them that it was coming.

This caused them to get backlogged and highlighted a weakness in their highly automated system: orders are not fulfilled based on how long ago they were submitted, but instead based on:

• the number of items
• the type of items
• the shipping method
• the shipping destination

In their system design, they incorrectly assumed that all orders would get packed within a couple days.

By constantly hammering them with new orders to get fulfilled, a small number of orders kept getting pushed to the back of the queue, causing them to not get fulfilled for weeks. If this happened to you, our sincerest apologies!

Now that we understand the problem, we can improve it. We've adjusted our order submission process to account for this reality, and our fulfillment center is hard at work making upgrades to their process automation to address this gap from their perspective. There's lots of different ways to chip away at this problem and make the fulfillment process smoother for everyone, and we're on it.

A note on US order fulfillment times:

What the EU just experienced, is coming to the US. For a different reason, and unfortunately not one we can easily solve.

That's to say, now that we're in November, it's officially the Holiday Shipping Season in the US. Also known as logistics hell. Expect every step of the logistics process to be at (or above) capacity, with bottlenecks (and delays) left and right, and individuals taking shortcuts to keep up with the pressure.

Expect any combination of the following possibilities to delay your order getting delivered to you:

• Freight shipments unloading at the harbor or airport
• Customs checks for freight shipments
• Freight deliveries from port to warehouse
• Fulfillment center receiving freight shipments
• Fulfillment center preparing bulk freight for individual shipments
• Fulfillment center packaging and shipping orders
• Parcel carriers picking up parcels from the fulfillment center
• Post sorting at parcel distribution centers
• Handoffs from bulk parcel shipment companies to local postal services
• Local postal services or express services in their last mile deliveries

We will do our best to communicate any known delays for freight shipments and our fulfillment center as quickly as possible, keep an eye on #stock_batch_updates in Discord for the most up to date information. Please be patient with parcel carriers this holiday season, they've got their work cut out for them! Rest easy knowing that we will always make sure that you get what you paid for, even if it takes a little longer than hoped.

‍

Switches: quality control, batch allocations, new SKUs??

If you have an order for a switch pack that hasn't yet shipped, you've received an email giving you a heads up on the status of your order: the switch packs aren't ready to ship yet.

Here's the rundown of what happened:

• We received feedback from our community that some switches were not completely smooth during the full distance of the keypress. At times, they would "jump" or "skip," particularly when the key is pressed from the corner or while also pushing sideways.
• A root cause investigation was completed, and we determined that (unapproved) changes were made to the switch mold that negatively affected quality for a small (but significant) percentage of switches.
• This issue was most present in the 70pack of L45 switches, and an emergency production was run to fix it: EU-Drop.
• After careful review, we determined that the best course of action was to quarantine and destroy all of the switch packs currently at both fulfillment centers, and produce replacement switches using a new SKU. This makes for a clean break and ensures we only ship the highest quality products. These are batches NA-Replacement and EU-Vervanging.
• There was an additional batch of switches getting ready to be manufactured, EU-Koe and NA-Cow, that got delayed while the investigation was ongoing, but have since been wrapped into the next large switch pack batch.

The decision to quarantine all switch packs caused confusion.

The old switch packs getting quarantined happened while the fulfillment centers were actively working on fulfilling orders. This caused a bit of a mess that needed to get cleaned up and resulted in some orders getting submitted to get fulfilled even though there were not switch packs available with which to fulfill them.

This has since been cleaned up.

All switch packs in individual orders have been reassigned to the new SKU and have been reallocated to the earliest delivering switch packs.

For the orders with 70packs of L45s, that were originally allocated to EU-Drop, have also been assigned the new SKU but have maintained the EU-Drop batch allocation. These switches are at the warehouse. However, we need the fulfillment center to swap these packs from the old SKU: SW1-LKR-L45-70P to the new SKU: SW2-LKR-L45-70P

Once the EU fulfillment center swaps the SKUs, the batch will again be listed as delivered and you will receive a notification email that you can (again...) confirm your shipping address and submit your order to get fulfilled.

New orders for switches are now possible.

Now that we have reassigned and reallocated all outstanding preorders, we can allow new orders to be placed.

‍

Shipments start:

EU-Drop: ASAP

EU-Vervanging: 21st of November

EU-Koe: 27th of November

EU-Snoepje: 28th of November

EU-Drop-2: 30th of November

‍

NA-Replacement: 27th of November

NA-Cow: 28th of November

NA-Liquorice-2: 30th of November

‍

In stock? Can it be??

A general update for all Wooting keyboards.

The demand for Wooting keyboards has consistently exceeded supply, a truism ever since the original 60HE Founder's Campaign. Despite scaling production as fast as possible, we have been limited by a number of different bottlenecks over the last two years. Try as we may, we simply could not produce enough keyboards to match the ever-growing interest from gamers across the world.

...until now!

At the time of writing, all layouts/variations of the fullsized Wooting Two HE and the Wooting UwU are in stock in both the US and the EU fulfillment centers, ready for immediate* shipment!

*immediate shipment still requires a couple business days to get packed and shipped, especially with the EU fulfillment center.

But what about the 60HE, you ask?

We have received to our fulfillment centers a tremendous number of 60HEs over the last few weeks.

In the US

NA-Sunbeam has delivered to the warehouse and contains enough keyboards to fulfill every single outstanding preorder. This batch will start shipments tomorrow, and from then there will be stock readily available for at least a couple weeks.

In the EU

There are enough ISO layout keyboards at the warehouse to ship all current preorders and have a good amount of stock left over. That's very close to being true for ANSI layout keyboards as well, but not quite.

That said, with the sheer quantity of pre-orders ready to get shipped, we are limited by the capacity of our EU fulfillment center to get them shipped. We're working closely with our fulfillment center to get as many shipments sent out as quickly as possible, but it will take some time.

How long will stock last?

Tough question to answer, but an important one. Based on current sales rates and the schedule for freight deliveries to our warehouse, we should be able to maintain "in-stock" for the foreseeable future. However, it's difficult to predict how being "in-stock" will impact the sales rate.

How many people are sitting on the sidelines, avoiding the pre-order process, who are now ready to join the team? The short answer is: we don't know how many, but we know it's not zero.

Therefore, it remains true that the sooner you place an order, the sooner you receive it. Once any given batch sells out, new orders will fill into the next batch. If that batch has not yet been delivered to the warehouse, then the system will seamlessly transition into a (short) back-order status.

‍

This batch update is formatted a little bit differently than usual. Instead of creating a separate post for different products, I'll be listing each of the upcoming batches for our products and the expected dates by which we expect to start sending shipments.

‍

Please note that these dates are estimates, and can change for any number of reasons. Particularly as we start looking towards the holiday season, expect the dates to be refined the closer they get.

‍

60HE

NA-Nebula: currently shipping.

NA-Sun: shipments start 10th of October.

NA-Sunbeam: shipments start the 25th of October.

NA-Pancake: shipments start the 17th of November.

NA-Syrup: shipments start the 5th of December.

EU-Zon: currently shipping.

EU-Zonnestraal: shipments start the 17th of October.

EU-Pannenkoek: shipments start the 26th of October.

EU-Leeuw: shipments start the 14th of November.

EU-Leeuwin: shipments start the 16th of November.

EU-Poedersuiker: shipments start the 21st of November.

EU-Siroop: shipments start the 23rd of November.

‍

W2HE

NA-House: shipments start the 22nd of October.

NA-Tiger: shipments start the 14th of December.

EU-Huis: shipments start the 17th of October.

EU-Tijger: shipments start the 14th of December.

‍

UwU

NA-Cutiepie (air freight): currently shipping.

NA-Cutiepie (sea freight): shipments start the 12th of October.

NA-Brass: currently shipping.

NA-Pebble: shipments start the 4th of January.

EU-Schatje (air freight): currently shipping.

EU-Schatje (sea freight): shipments start the 24th of October.

EU-Brons: currently shipping.

EU-Steentje: shipments start the 28th of November.

‍

Alumaze60

NA-Maze: shipments start the 26th of October.

NA-Maze-B2: shipments start the 31st of October.

EU-Doolhof: shipments start the 26th of October.

EU-Doolhof-B2: shipments start the 31st of October.

‍

Detachable Cables

NA-Turn: shipments start the 12th of October.

NA-Rotation: shipments start the 26th of October.

EU-Draai: currently shipping.

EU-Rotatie: shipments start the 17th of October.

‍

Polycarbonate plates

NA-Plate: currently shipping.

NA-Plate-2: shipments start the 8th of November.

EU-Plaat: currently shipping.

EU-Plaat-2: shipments start the 8th of November.

‍

Switches

NA-Liquorice: shipments start the 23rd of October.

NA-Cow: shipments start the 26th of October.

EU-Drop: shipments start 12th of October.

EU-Koe: shipments start: the 18th of October.

‍

‍

Over the last month or so, we've received reports from a few customers whose Lekker switches aren't perfectly smooth for the full distance of the keypress.

‍

This concern has been investigated at length by our team, and the detailed results of the investigation have been posted over in Discord: 

https://discord.com/channels/167181566978555904/1137393804786278481/1153338065838940300

‍

The short story: it turns out that a tiny percentage of switches have an unlucky combination of regular manufacturing tolerances that cause unwanted behavior. We have made the determination that the best course of action is to continue shipping switch packs and keyboards with these switches and aggressively resolve any cases of suboptimal switches via the standard warranty process.

New switches are getting manufactured that have slight tweaks designed to reduce the chance that this defect can occur. If the switch pack in your order is allocated to one of these batches listed here, these are the new switches. To be clear: 99+% of the "old switches" are perfectly fine. But for the 1% that experience this issue, replacements will be sent using this upcoming batch.

‍

These switches finished getting manufactured yesterday, and quality control will check them today. These switches will travel via air freight to our fulfillment centers in the EU and the US, allowing shipments for orders that include them to start on:

EU-Drop: 12th of October
EU-Koe: 18th of October
NA-Liquorice: 23rd of October
NA-Cow: 26th of October

We're wrapping up the production of the new Wooting Detachable Cables! 

The manufacturer will complete them by Monday the 25th of September, and quality control is expected to be completed on the 26th of September.

Once they pass QC testing, we can initiate the freight shipments to each of our fulfillment centers.

‍

For each of the upcoming batches, we can start shipments on...

EU-Draai: 12th of October

EU-Rotatie: 17th of October

NA-Turn: 12 of October

NA-Rotation: 26th of October

‍

We're thrilled that so many people are interested in these cables, and we've heard your feedback that you want more color options! Critically, we completely missed a white version of the detachable cable... Whoops! A white cable is definitely going to happen, once we work out precisely what shade of white is best. Additionally, we've heard the roar from our community asking for cable colors that match the upcoming Alumaze60. In retrospect, we probably should have launched with those color options available... We're hard at work getting new color options sampled and confirmed, but it'll take a couple months before those are ready to ship.

The Polycarbonate plates with compatibility for screw-in stabilizers are almost ready! 

Production has completed, quality control tests have been passed, and the plates are on their way to our two fulfillment centers.

‍

Shipments can start on...

EU-Plaat: 5th of October

EU-Plaat-2: 8th of November

NA-Plate: 5th of October

NA-Plate-2: 8th of November

We're thrilled at how much excitement and interest there is for the Alumaze60! Preorders have been open for a little while now, and while customers haven't gotten their hands on them quite yet, we have been listening closely to the feedback from the community.

‍

One of the comments we heard loud and clear: why doesn't the Alumaze60 come with case foam? The answer was that typically, cases don't come with foam, that the stock foam included with the keyboard does the job just fine. However, if our goal is to make the best possible product for your modding desires, then we should include a case foam that is the perfect size for use with the Alumaze60. So that's what we're going to do! 

‍

Want to learn more about the decision and why we made it? Check out this Youtube video:

https://www.youtube.com/watch?v=y8xR6E0M0GI

‍

Unfortunately, since the first batch of Alumaze60 had already been produced, this meant that we needed to hold off on the freight shipment until the factory could receive the foam sheets and add them to all of the cases. For them to do this rework and then initiate the freight shipment would push back customer deliveries about three weeks.

‍

For each of the upcoming batches, we expect the Alumaze60 to be at the warehouse in time to start shipments on...

EU-Doolhof: 19th of October

EU-Doolhof-B2: 25th of October

NA-Maze: 19th of October

NA-Maze-B2: 25th of October

Over the next few weeks, several batches of 60HEs will deliver to our EU fulfillment center. By the end of October, we may even have the 60HE in-stock and ready for immediate shipments! Based on current projections, it looks like we'll have the ISO layout in-stock, but perhaps not ANSI layout. Remember, keyboards get allocated out of the earliest available batch at the time of purchase, so the sooner you place your order, the sooner it delivers.

‍

EU-Zon

Shipments start the 3rd of October

As a direct result of the war outbreak between Azerbaijan and Armenia, and the closure of the airspace above those nations, air freight shipments out of China to Europe are very chaotic. EU-Zon is affected by this, having experienced multiple flight cancellations and reshuffling of schedules.

Our best available information at the time of writing is:
1) Flight will depart China on the 23rd of September, deliver to Schiphol warehouse on the next Monday.
2) Clear customs and truck to our fulfillment center by Thursday.
3) Be received and made available for individual shipments by the following Tuesday, the 3rd of October.

This is approximately a one week delay, and this means that the keyboards will also be ready on the same day that UwU shipments start. Our intention is to submit orders of both keyboards and keypads simultaneously, in the way that our fulfillment center has communicated makes it most efficient for them to process all of the shipments.

‍

EU-Zonnestraal

Shipments start the 17th of October

These keyboards have just passed the quality control checks, and passed with flying colors! The freight shipment is getting prepared. Due to the situation described under EU-Zon, we've added a few extra days to the delivery estimate. It may be that the current chaos in the freight market sorts itself out, in which case these keyboards may be ready a few days earlier than currently listed. Alternatively, there's a chance that the situation escalates. We appreciate your flexibility and understanding.

‍

EU-Pannenkoek

Shipments start: the 31st of October

These keyboards are expected to finish production next week, and the quality control checks will be completed shortly thereafter, followed by the initiation of the freight shipment. We've allocated an extra week for the freight shipment, for the reasons listed above.

Over the next month, a series of batches will deliver to our US fulfillment center in quick succession. We expect that by the end of October, we'll have 60HEs in-stock and readily available for immediate shipment! 

However... We've said that before, only for the sales rate to increase as wait times reduced, and never actually actually achieved "in-stock..." Keyboards get allocated to an order at the time of purchase, so the earlier the order gets placed, the sooner it will ship and deliver.

‍

NA-Nebula

Shipments start: 26th of September

These keyboards have arrived at our warehouse today and are currently being readied for individual shipments! We expect them to be ready by Monday evening next week, so we'll open up the address confirmations Tuesday morning.

‍

NA-Sun

Shipments start: 10th of October

These keyboards have been manufactured and are currently floating on a container ship in the middle of the Pacific Ocean. We expect them to deliver to our warehouse in plenty of time to achieve the delivery dates listed in your Wooting Hub.

‍

NA-Sunbeam

Shipments start: 25th of October

These keyboards have just completed getting manufactured, and have passed the quality control checks! Freight shipment will start next week, and typically takes about 4 weeks to deliver to our fulfillment center in the US.

‍

NA-Pancake

Shipments start: 31st of October

The next batch of keyboards to get manufactured is expected to finish production on the 25th of September, after which we'll have the quality assurance team do their checks, then initiate the freight shipments.

EU-Schatje (air freight)

The air freight shipment for UwUs was booked, confirmed, and ready to go, but right as we approach the finish line... A geopolitical wrench gets thrown at us: the Azerbaijan and Armenian conflict has escalated to outright war and the airspace above those nations has been closed down.

Ever since Russian airspace closed to commercial air travel, the most used transit corridor for flights between Asia and Europe is directly over these two nations. As a result, the flight that EU-Schatje was going to take got cancelled. We've needed to get the freight shipment requoted and rebooked (for 30% higher price, GUH) and comes with nearly a week delay.

The situation is still evolving, and until it's "wheel's up" on the air freight shipment, we can't be 100% sure that the following dates will be achieved, but this is the best expectation we have at this moment:

Air freight departs on either Friday the 22nd or Saturday the 23rd, and delivers to the interim warehouse at Schiphol by Monday the 25th.

The shipment then clears customs and gets trucked to our fulfillment center to get delivered by Thursday the 28th.

The fulfillment center receives the pallets and prepares them for individual shipments in time to:

Start shipments on Tuesday, the 3rd of October
‍

EU-Schatje (sea freight)

The freight shipment has been initiated, but the shipping schedule we were quoted was not optimal. While we did have a little extra room in the freight shipment planning, our past experiences with shipments to the EU suggest that it is likely for the boat to get delayed at one or more of the port of calls ahead of Rotterdam, and as such we have updated the shipment date to:

Start shipments on Tuesday, the 24th of October.
‍

NA-Cutiepie (air freight)

The air freight shipment heading to the US flew the other direction and was unaffected by the geopolitical turmoil. After a quick stop in Alaska and then onto Los Angeles, the UwUs have been unloaded and have cleared customs. It should deliver to our fulfillment center today or tomorrow, at which point they'll make it ready for individual shipments in time to:

Start shipments on Monday the 25th of September.
‍

NA-Cutiepie (sea freight)

These UwUs are on track to:

Start shipments on Tuesday, the 10th of October.
‍

EU-Brons and NA-Brass

Unfortunately the brass case won't be ready at the warehouse in time for the very first UwU shipments. The short story is that we made the decision to add an extra coating on the brass case to ensure we make the best possible product. More details are shared in the update video:

https://www.youtube.com/watch?v=llKciQi4FgI

We expect the brass cases to be at our US fulfillment center in time to:

Start shipments on Tuesday, the 3rd of October.

In the EU, it's a little bit more up in the air, so to speak, but the current expectation is for them to be available in time to:

Start shipments on Thursday, the 5th of October.

‍

Quick update for the folks waiting for NA-Nebula or EU-Nevel!

The keyboards have completed manufacturing, and have passed the quality control testing! They are now starting their freight journeys to our US and NL fulfillment centers.

We are on track to meet the estimated shipment days listed on the Wooting Hub! 

New orders for ANSI and ISO keyboards in both regions are still filling into Nevel/Nebula. If you're waiting to order, make sure to get it placed before this batch fills up! 

‍

EN-Nevel

Shipments start the 12th of September

‍

NA-Nebula

Shipments start the 23rd of September

‍

The next batch of full sized Wooting Two HE keyboards have been manufactured, quality control has been approved, and are currently in transit to our respective US and NL fulfillment centers!

‍

EU-Munt

Shipments start: 24th of August

‍

NA-Mint

Shipments start: 12th of September

‍

Based on current sales rates, we expect that we'll be fully caught up on preorders at the time that the keyboards are ready to ship. In the US we expect to have some keyboards available for immediate purchase and shipment once this batch delivers. In the EU it looks like ISO layout keyboards will be in stock for at least a couple weeks, while ANSI layout keyboards will probably not.

As always, when you place an order you will get assigned the earliest available batch for each of the products in your order. Don't miss catching this batch by waiting for it to arrive to the warehouse before you order! 

‍

Looking forward...

The next batch of W2HEs after Mint/Munt will be EU-Huis and NA-House. These are expected to finish getting manufactured on the 15th of September, with freight shipments to deliver to the respective fulfillment centers around the middle of October.

The Nuts and Bolts

UwU production timings and shipment expectations

The UwUs are moving forward from what was originally an idealistic fantasy into becoming a real product on your desk! We've experienced challenges along the way, but nothing that we can't overcome. To follow the story from the beginning, check out the Wooting Blog posts:

Mass production delayed, DVT & What to Expect

This batch update is to communicate the most current expectations and dates for when we expect to achieve the remaining milestones, up to and including the delivery to your front door. Please note that while these estimates are becoming more precise the closer we get to delivery, they are still estimates and they can change.

Mass Production

In the update video, Calder stated that we expect mass production to complete by the end of August. This expectation is accurate, but it is ambitious. Therefore, internally we want to add a little bit of wiggle room - just to be safe. Specifically, we've listed the manufacturer ready date as the 8th of September.

Freight Shipments

Once all the UwUs have been manufactured, they need to get trucked to a freight forwarder's warehouse. The freight forwarder then brings the UwUs to the airport and the seaport for the respective air freight and sea freight shipments. This takes a couple days to complete.

From there, the transit via airplane or cargo ships can be completed. The plane ride itself doesn't take long, the sea freight does take quite a while. In both cases, we are reliant on catching the next cargo shipment. Sometimes we can sneak into the queue right before the cargo gets loaded and it only takes a day or two, but sometimes we just barely miss the boat and have to wait until the next flight or ship. These freight schedules change very frequently, including as late as a couple days before departure.

Our experience has told us to err on the side of caution, and give a full two weeks timeframe for air freight and at least four weeks for sea freight. We've listed the delivery date to the warehouse as the 22nd of September for air freight, and the 9th of October for sea freight.

Historically, sea freight shipments to the EU have been more likely to get delayed because the cargo ships stop at many ports in the Mediterranean and Atlantic coast before arriving in Rotterdam. In the US, the boat goes straight to the Port of Los Angeles.

After arriving at port, whether airport or seaport, the UwUs are then trucked to our two fulfillment centers.

Last-Mile shipments

We've communicated to both our US and EU fulfillment centers that as soon as these freight shipments arrive, to receive the inventory as quickly as possible, so that the UwUs can be ready for individual shipments ASAP.

Optimistically, we think that the warehouses can have the UwUs ready to start shipments on the 25th of September for air freight and the 10th of October for sea freight.

From that point, it'll take a day or two to get all the orders packed and shipped, with each last-mile shipping method has a different expected shipping time. For more information on the estimated timeframes for each shipping method, check out these two help articles: 

Shipping Method Information

My Pre-Order is Ready to Ship... Now What?

Wooting Hub Estimates

All of the above dates are reflected in the delivery estimate shown on your Wooting Hub, including accounting for your specific last-mile shipping method.

The Wooting Hub

Wooting 60HE in the EU 

This update will provide the status of the next six batches of 60HEs that are scheduled to deliver to our EU fulfillment center.

‍

EU-Komeet

This batch is ready to go and is currently shipping! If you haven't yet confirmed your shipping address via the Wooting Hub, please do so. Otherwise, the remainder of the orders in this batch will be automatically shipped during the week of the 24th of July.

‍

EU-Krater

New orders for ISO keyboards are currently being allocated to this batch, though the ANSI keyboards are getting allocated to the next batch.

The keyboards in this batch have completed manufacturing, got the stamp of approval from quality assurance, and the freight shipments have been scheduled.

We expect that the remaining ISO keyboards in this batch will be allocated to orders well before this batch arrives to the fulfillment center.

Shipments start: the 22nd of August

‍

EU-Asteroïde

The first keyboards allocated to this batch date back to the end of June, specifically ANSI layout keyboards. Indeed, all of the ANSI keyboards in this batch got allocated to orders as we experienced an explosion of interest out of Japan!

Wooting ファミリーへようこそ!

To attempt to rebalance the keyboard allocations, we've redirected the entirety of NA-Asteroid to get shipped to the EU instead, which doubled the size of this batch. Before we could execute on that swap, some orders got allocated keyboards out of the next batch, EU-Nevel. All of these orders were reallocated back into EU-Asteroide, so make sure to double check your batch!

The manufacturer ready date for this batch is the 31st of July, at which point they will begin their freight shipment to our EU fulfillment center.

Despite having effectively doubled the size of this batch, the ANSI keyboards will be fully allocated to orders long before the freight arrives to our fulfillment center. It may be the case that when this batch delivers, ISO layout keyboards will be in stock for a short time.

Shipments start: the 31st of August

‍

EU-Nevel

Once all of the keyboards in EU-Asteroide get allocated, new orders will be assigned a keyboard out of the next batch, EU-Nevel.

These keyboards are expected to finish manufacturing on the 18th of August, at which point they will begin their freight shipment to our EU fulfillment center.

Once this batch delivers to our warehouse, we expect to have a healthy in-stock level of ISO layout keyboards and be able to consistently sell directly from available inventory. This is not expected to be the case with ANSI-layout keyboards.

Shipments start: the 12th of September

‍

EU-Zon

Right on the heels of EU-Nevel, we've got EU-Zon getting manufactured.

The manufacturer ready date for this batch is the 25th of August, at which point they will begin their freight shipment to our EU fulfillment center.

It is possible that when this batch delivers, there will be a brief, fleeting moment when the ANSI layout keyboards will be in stock.

Shipments start: the 26th of September

‍

EU-Zonnestraal

The next batch after EU-Zon is EU-Zonnestraal, coming just a week and a half later.

The manufacturing ready date is the 8th of September, with the freight shipment occurring shortly thereafter.

Based on current sales rate projections, we expect that once this batch delivers to have both ISO and ANSI layout keyboards in stock, though the stock level likely won't be enough to stay in-stock through the next batch delivery.

Shipments start: the 10th of October

‍

‍

Wooting 60HE in the US

This update will provide the status of the next five batches of 60HEs that are scheduled to deliver to our US fulfillment center.

‍

NA-Comet

This batch is almost at the warehouse! The keyboards have arrived in the Port of Los Angeles and are currently en route to our fulfillment center in Las Vegas. They are expected to deliver to the warehouse on Tuesday the 25th, at which point they will need to be received and checked in as available inventory. This typically takes a couple days.

Shipments start: the 27th of July

‍

NA-Crater

New orders for the 60HE in the US are currently being allocated to this batch. We expect this batch to be fully allocated before it delivers to our warehouse.

These keyboards have completed manufacturing, got the stamp of approval from quality assurance, and the freight shipment has been scheduled!

Unfortunately, we've just barely missed the boat for the freight shipment to the US. Assuming that we're able to get a slot on the next shipment, this puts the arrival to our warehouse on the 24th of August. This pushes back the estimated delivery date for these orders about a week. If for any reason the keyboards don't make it on the next ship, we'll provide that as an additional update by the 1st of August. If you don't see that follow up by then, you can assume the keyboards are on the way and all is well.

Shipments start: the 28th of August

‍

NA-Nebula

Once the current batch NA-Crater gets fully allocated, new orders will be assigned a keyboard from NA-Nebula.

These keyboards are expected to finish manufacturing on the 18th of August, at which point they will begin their freight shipment to our US fulfillment center.

Shipments start: the 26th of September

‍

NA-Sun

Right on the heels of NA-Nebula we've got NA-Sun getting manufactured.

The manufacturer ready date for this batch is the 25th of August, at which point they will begin their freight shipment to our US fulfillment center.

Once this batch of keyboards delivers to our warehouse, we expect to have a healthy in-stock level and be able to consistently sell directly from available inventory.

Shipments start: the 3rd of October

‍

NA-Sunbeam

The next batch after NA-Sun is NA-Sunbeam, coming just a week and a half later.

The manufacturing ready date is the 8th of September, with the freight shipment occurring shortly thereafter.

If we aren't in stock in the US by the time this batch delivers, then I'll be amazed - these batches are huuuge! 

Shipments start: the 10th of October.

Fullsized Wooting Two HE in the EU

‍

This update will provide the status of the previous batch EU-Koffie, the current batch EU-Mint, and the next batch EU-Huis.

‍

EU-Koffie

This batch of W2HEs has just been completed, with orders in this batch having been shipped out! 

If you haven't received your order yet, it should be delivering soon. Enjoy! 

‍

EU-Munt

New orders for the W2HE in the EU are currently filling into EU-Munt, both for ANSI layout and ISO layout.

The production of these keyboards is expected to finish on the 3rd of August, at which point they will begin their freight shipment to our EU fulfillment center.

At the current sales rate, we expect that once this batch of W2HE arrives, we will be in stock and keyboards available for immediate shipments for a short time. The ISO units are expected to stay in stock through the arrival of the next batch, but the ANSI units may fall back into a preorder status prior to EU-Huis arriving.

Shipments start: the 24th of August

‍

EU-Huis

Once all of the keyboards in EU-Munt (for either layout) get allocated to orders, new orders will fill into EU-Huis.

The production of these keyboards is expected to finish on the 15th of September, at which point they will begin their freight shipment to our EU fulfillment center.

Once this batch arrives to the warehouse, we expect to have a healthy in-stock level for both ANSI and ISO keyboards and be able to consistently sell directly from available inventory.

Shipments start: the 15th of October

Fullsized Wooting Two HE in the US

This update will provide the status of the previous batch NA-Coffee, the current batch NA-Mint, and the next batch NA-House.

‍

NA-Coffee

This batch of W2HE has just been completed, with orders in this batch having been shipped out!

If you haven't received your order yet, it should be delivering soon.

‍

NA-Mint

New orders for the W2HE in the US are currently filling into NA-Mint.

The production of these keyboards is scheduled to finish on the 3rd of August, at which point they will begin their freight shipment to our US fulfillment center.

At the current sales rate, we expect that once this batch of W2HE arrives, we will be in stock and keyboards available for immediate shipments for a short time.

Shipments start: the 12th of September

‍

NA-House

Once all the keyboards in NA-Mint get allocated to orders, new orders will fill into NA-House.

The production of these keyboards is scheduled to finish on the 15th of September, at which point they will begin their freight shipment to our US fulfillment center.

Once this batch arrives to the warehouse, we expect to have a healthy in-stock level and be able to consistently sell directly from available inventory.

Shipments start: the 15th of October

‍

The newest batch of full-sized Wooting Two HEs have finished production and have passed the quality control testing with flying colors! 

We specifically tested the new kickstand foot design to ensure that they work as intended, and we're pleased to report that this is the case! With this new design, we expect the feet to be more durable over the life of the keyboard. Thanks for your patience while these new feet were formed from the new mold, we know that having the estimated delivery date pushed back is never a fun experience. While this update is a small tweak to the overall product, we're always looking at ways to incrementally improve our products to ensure that you can enjoy them for many years to come!

Now that the production is complete and QC complete, the freight shipments can be initiated to get these keyboards to our warehouse as soon as possible. We expect that it will take about three weeks to deliver to our fulfillment centers in the Netherlands and in the US. Once delivered to the warehouse, the pallets of keyboards will be prepared for individual shipments, and your order can be shipped to your front door.

‍

EU-Koffie

Shipments are expected to start: 4th of July, 2023

‍

NA-Coffee

Shipments are expected to start: 6th of July, 2023

Note: with the Independence Day holiday in the US, it's possible that our fulfillment center takes longer than normal to receive the bulk pallets and prepare them for individual shipments. While this holiday doesn't typically experience a big rush in shipments, it's definitely the case that lots of employees will be wanting to take vacations around this time.

Be sure to sign up for Discord notifications for this batch via the Wooting Hub so that you can be notified the moment that the address confirmation system opens up! 

A quick update for our newest 60HE batches, scheduled for production this summer!

For each of these batches, I'll list the planned manufacturer ready date. This is the date on which the batch finishes getting manufactured. Note that these dates are not necessarily set in stone, but are a good approximation.

From there, the batch needs to be inspected by the quality assurance team, prepared for the bulk freight shipment, and then travel from the manufacturer to our US fulfillment center. This process can take anywhere between three and eight weeks, depending on lots of different factors including freight schedules.

Once each batch arrives at the fulfillment center, they will prepare the bulk pallets for individual shipments. Once everything is ready to go, last-mile shipments to your front door can begin! 

‍

NA-Comet

Manufacturer ready date: 16th of June, 2023

‍

NA-Crater

Manufacturer ready date: 24th of July, 2023

‍

NA-Asteroid

Manufacturer ready date: 31st of July, 2023

‍

NA-Nebula

Manufacturer ready date: 15th of August, 2023

‍

NA-Sun

Manufacturer ready date:15th of September, 2023

‍

A quick update for our newest 60HE batches, scheduled for production this summer!

For each of these batches, I'll list the planned manufacturer ready date. This is the date on which the batch finishes getting manufactured. Note that these dates are not necessarily set in stone, but are a good approximation.

From there, the batch needs to be inspected by the quality assurance team, prepared for the bulk freight shipment, and then travel from the manufacturer to our EU fulfillment center. This process can take anywhere between three and eight weeks, depending on lots of different factors including freight schedules.

Once each batch arrives at the fulfillment center, they will prepare the bulk pallets for individual shipments. Once everything is ready to go, last-mile shipments to your front door can begin! 

‍

EU-Komeet

Manufacturer ready date: June 19th, 2023

‍

EU-Krater

Manufacturer ready date: 24th of July, 2023

‍

EU-Asteroide

Manufacturer ready date: 31st of July, 2023

‍

EU-Nevel

Manufacturer ready date: 15th of August, 2023

‍

EU-Zon

Manufacturer ready date: 15th of September, 2023

‍